Construction Mgmt Software for Work at Height in Singapore
See how construction mgmt software addresses work at height in Singapore to protect workers, reduce accidents, and make safety checks faster and easier.
by Sam Chen
|
Definition of Work at Height
Work at height means any job where a worker could fall and get hurt. This includes tasks above the ground, near edges, or on surfaces that could break under weight. It’s not only about high-rise construction. Even installing ceiling lights, working on scaffolding, or checking a roof counts. The moment there’s a risk of falling, work at height protocols must be followed.
Examples include:
Working in an elevated place.
Working close to an open edge.
Working near a floor hole or opening.
Working on a fragile surface.
Any other place—above or below ground—where there’s a risk of falling from height or into depth.
Law and Industry Standards
In Singapore, the Ministry of Manpower (MOM) has strict rules to keep work at height safe. The WSH Work at Height Regulations require all employers to do risk assessments, provide proper equipment, and ensure workers are trained and certified. These are not just formalities—they are essential for protecting lives. Breaking the rules can lead to heavy fines, damage to reputation, and even loss of life.
Key laws and codes include:
WSH (Work at Heights) Regulations – How to plan, organize, and carry out work at height.
WSH (Risk Management) Regulations – How to identify hazards, assess risks, and put safety controls in place.
WSH (Incident Reporting) Regulations – How to report workplace accidents and unsafe events.
Industry standards include:
Code of Practice on WSH Risk Management
The full list is available in the WSH Approved Codes of Practice Notification.
Fall Prevention Plan (FPP)
A Fall Prevention Plan is the backbone of height safety. It explains how to find hazards, control them, rescue workers if needed, and check safety gear regularly. This plan must be updated whenever site conditions change. A good plan moves safety from being reactive to proactive—stopping accidents before they happen.
Permits to Work (PTW)
A Permit to Work system is a formal check before a dangerous task begins. For work at height, it confirms that all safety steps are done—workers are trained, gear is safe, and risks are under control. In Singapore, PTWs are a legal safeguard. They’re not just paperwork—they’re the final green light before work starts.
Work at Height Statistics in Singapore
Even with strict laws, work at height is still one of the top causes of workplace deaths in Singapore. MOM reports show falls from height make up a large share of serious injuries and fatalities in construction. These numbers prove why strong safety systems are a must—not just to follow the law but to save lives.
How GoBuid’s Construction Mgmt Software Improves Work at Height Safety
👉Try all features free for 30 days
GoBuid’s construction mgmt software gives builders complete control over work at height safety. It helps create detailed safety permits, inspection checklists, and training logs—all in one place. The core feature is the electronic Permit to Work (ePTW). This digital system blocks any work at height from starting unless all safety requirements are met.
How ePTW works:
Set the task – Supervisors create a digital permit for the height-related job.
Complete safety checks – Workers confirm their training, inspect equipment, and review hazards.
Approve digitally – Supervisors give the green light through the software—no missing forms, no lost paperwork.
Track in real time – Managers can monitor the job’s safety status from any device.
The software also runs real-time risk assessments. If hazards are detected, it sends alerts immediately so supervisors can act. All training records are stored in one database, ensuring only certified workers get assigned to dangerous tasks. Incident reporting is instant—staff can submit reports from their phone, helping investigations and fixes happen faster. By turning these safety steps into a simple, automated process, GoBuid helps prevent injuries and saves lives.
How Construction Mgmt Software Solves Work at Height Challenges
Construction mgmt software takes work at height regulations Singapore and makes them easy to follow on-site. Everything is managed in one system—safety inspections, equipment maintenance, worker communication, and training records.
With ePTW integration:
No work starts without digital approval.
Safety gear is checked and logged before use.
Scaffold inspections and edge protections are confirmed in writing.
Extra safety features include:
Automatic alerts when safety gear needs inspection or replacement.
Step-by-step digital checklists so workers don’t miss critical tasks.
Mobile access for supervisors to check compliance instantly.
This approach closes the gap between safety plans on paper and actual safety in the field. The ePTW ensures every task meets WSH work at height regulations before it begins. In practice, the system works like a 24/7 safety officer—always watching, always making sure workers go home safe.
